Concord Camera 5340z User Manual

21

TAKING PICTURES/VIDEO CLIPS

4. Press the 

 or 

 to select the settings you wish to set then press the SET button.

5. Press the 

 button to close the menu window.

Light Metering menu will not be shown if “Sport”, “Landscape”, “Portrait” or “ Night” scene is 

selected.

Use the macro mode to shoot close-up of subjects in the range of 10 cm to 50 cm (3.94 in. to 19.89 

in.)

1.  Press the DISP button to turn the LCD monitor on.

2.  Set the scene to “Auto” mode. (P. 24)

3. Press the   button. The   icon appears on the LCD monitor. 

4.  Shoot the image.

1. The focus range mentioned above is the distance between the camera lens surface and the 

subject.

2. Any flash setting can be used in macro mode.

3. Always use the LCD monitor to compose images in macro mode. Shooting with the optical 

viewfinder is possible, however, images composed with the optical viewfinder might be off-

centered due to the parallax phenomenon.

4. When you do not intend to use Macro shooting anymore, remember to cancel Macro mode 

by pressing the   button.

Use the self-timer to set a delay from the time the shutter button is pressed to the time the image is 

shot.

1. Press the 

 button to until the Self-Timer icon ( 

 ) is shown on 

the LCD.

2.  Shoot the image.

•  The self-timer lamp starts blinking after the shutter button is fully 

pressed down. The image will be shot in approximately 10 seconds. 

The self-timer will blink faster two seconds before the shutter 

activates.