Clover Electronics HDC041 User Manual

•  To prevent fire or shock hazard, do not expose the product to rain or moisture. 
•  To avoid electrical shock, do not open the case of this product. 
•  Operate this product using only the recommended AC Power supply. 
•  Do not overload electrical outlets or extension cords; this can result in fire or electric 

shock. 

•  Keep this product away from strong magnetic fields. 
•  Do not expose this product in direct sunlight or strong reflected rays. 
•  Refer servicing to qualified personnel only. 
•  Do not change or modify this product, the warranty will be voided. 
 
 
 
 
 
•  1/3” Sony Super HAD CCD 
•  High Resolution 550 TV Lines (Color), 600 TV Lines (B/W) 

•  Day/Night Camera  

•  OSD (On Screen Display) 
•  3D DNR (Digital Noise Reduction) with 3D filter 

•  D-WDR (Digital Wide Dynamic Range) 

•  DC 12V Power Source 
 
 
 
 
 
1.  Attach the mounting bracket① to the wall or ceiling, wherever you want to install the 

camera. Locate a wall stud or ceiling joist and secure the mounting bracket using the 
supplied screws②.  

2.  Fix the mounting bracket① to the camera body④ with the provided screws③. 
3.  If necessary, change the settings to get the best images depending on your application 

by using the buttons on the rear of the camera (refer to the included instruction 
manual for OSD). 

4.  Connect the one end of BNC cable (not supplied) to the BNC (F) of 2’ cable attached 

to the camera and the other end (BNC) of cable to the video devices such as DVR, 
monitor/TV. Plug an AC power supply (not supplied) to the DC jack (red) on the 
camera.