Accusplit HDVF-C30W User Manual

Page of 38
8(E)
The following table shows the relationship between
switch 3 settings and the times when the PEAKING
control and the PEAKING adjustment screw are
enabled and disabled.
(Yes: Enabled, No: Disabled)
Switch 4
Selects whether the magnified section of the picture is
fixed as the center section or can be selected from the
upper left, upper right, lower left, lower right, and
center sections.
OFF: Selectable from among the 5 sections.
ON: Fixed as the center section.
In this case, the display automatically returns to
normal about 5 seconds after the MAG button is
pressed.
Switch 5
This switch is provided for service purposes. Normally
it should be left in the OFF position.
Switches 6 to 8
Adjust color temperature.
Note
Color temperature does not change except by the
above switch combinations. The screen display
luminance decreases as a result of color temperature
adjustment.
2
 Switch cover
Protects the setting switches 1 against moisture and
foreign objects.
Over time the cover may become cracked. If this
occurs, it should be exchanged.
Sony part number: 3-776-614-01
Note
To protect the setting switches, always replace the
cover after setting the switches.
PEAKING
Switch 3 OFF
Switch 3 ON
SEL1/SEL2 switch
MAG button
SEL1
SEL2
ON
(Magnified
display)
OFF
(Normal
display)
Control
Yes
No
No
Yes
Screw
No
Yes
Yes
No
Switch
Color temperature
6
7
8
OFF
OFF
OFF
Factory default (approx. 6500K)
ON
OFF
OFF
Decreases approx. 500K (becomes
reddish)
OFF
ON
OFF
Increases approx. 500K (becomes
bluish)
ON
ON
OFF
Increases approx. 1000K (becomes
bluish)
OFF
OFF
ON
Increases approx. 1500K (becomes
bluish)
Location and Function of Parts