Hitachi CU-HD1500 User Manual
7
System Configuration
Attach the Camera adapter(CA-HF1500) to the Camera head(SK-HD1500). Then connect the camera
control panel and setup control unit to the CU-HD1500.
1. AC power supply operation
control panel and setup control unit to the CU-HD1500.
1. AC power supply operation
When the CU-HD1500 CCU POWER switch is set to ON, the optical fiber cable connection is
checked automatically (it takes about 5 seconds), and then power can be supplied to the camera by
pressing the CAMERA POWER button to enable a video output signal.
The CABLE CHECK LED lights OK when the optical fiber cable is normal.
The intercom system is available when the CCU POWER switch is ON.
checked automatically (it takes about 5 seconds), and then power can be supplied to the camera by
pressing the CAMERA POWER button to enable a video output signal.
The CABLE CHECK LED lights OK when the optical fiber cable is normal.
The intercom system is available when the CCU POWER switch is ON.
Note: When operation mode is changed from MAIN mode to STBY mode, wait for 10 seconds to
restart the camera power.
Camera Head
SK-HD1500
Optical Fiber Cable
Camera control unit
CU-HD1500
Remote Control Unit
RU- 1500
Camera Adaptor
AC input
CA-HF1500
2. Camera stand alone operation
Supply 12VDC to the CA-HF1500, but do not connect either optical fiber cable or SM fiber cable.
The camera can be operated in stand-alone mode. The video signal appears at the camera MONI
OUT and SDI OUT1/2 connectors.
The camera can be operated in stand-alone mode. The video signal appears at the camera MONI
OUT and SDI OUT1/2 connectors.