Tektronix 1780-R User Manual
Operating Instructions
3–16
1780R-Series Operator’s Manual
a. To recall a preset, force the corresponding remote line
low.
b. To store a front-panel configuration at a preset location,
apply a low first to the Store line (pin 11) and then to the
desired preset. Alternately, the Store line and desired
preset line may be forced low simultaneously.
desired preset. Alternately, the Store line and desired
preset line may be forced low simultaneously.
Table 3–2: Remote Pin Functions
Pin
Name
Function
1
RGB Staircase Input
1 M
W input impedance to ground. Requires 10 V
staircase signal.
2
/ RGB Enable
Low = RGB Enable. Routes the signal on pin 1 to the
Horizontal amplifier, where it is added to the ramps
from the Ramp Generator.
from the Ramp Generator.
In RGB mode, the Ramp Generator reduces the
ramp to 1/3 or 1/4 size (selected by A2J585).
ramp to 1/3 or 1/4 size (selected by A2J585).
3
NC
4
/ Remote Sync Enable
Low = Remote Sync Enable. INT / EXT Reference
turned off, and instrument sync provided by the
signal on pin 10.
turned off, and instrument sync provided by the
signal on pin 10.
5
/ Preset 2
Low with Pin 11 High = Recall Preset 2.
Low with Pin 11 Low = Store current F/P settings at
Preset 2 location.
Preset 2 location.
6
/ Preset 3
Low with Pin 11 High = Recall Preset 3.
Low with Pin 11 Low = Store current F/P settings at
Preset 3 location.
Preset 3 location.
7
/ Preset 1
Low with Pin 11 High = Recall Preset 1.
Low with Pin 11 Low = Store current F/P settings at
Preset 1 location.
Preset 1 location.
8
/ Preset 4
Low with Pin 11 High = Recall Preset 4.
Low with Pin 11 Low = Store current F/P settings at
Preset 4 location.
Preset 4 location.
Operating Instructions
3–16
1780R-Series Operator’s Manual
a. To recall a preset, force the corresponding remote line
low.
b. To store a front-panel configuration at a preset location,
apply a low first to the Store line (pin 11) and then to the
desired preset. Alternately, the Store line and desired
preset line may be forced low simultaneously.
desired preset. Alternately, the Store line and desired
preset line may be forced low simultaneously.
Table 3–2: Remote Pin Functions
Pin
Name
Function
1
RGB Staircase Input
1 M
W input impedance to ground. Requires 10 V
staircase signal.
2
/ RGB Enable
Low = RGB Enable. Routes the signal on pin 1 to the
Horizontal amplifier, where it is added to the ramps
from the Ramp Generator.
from the Ramp Generator.
In RGB mode, the Ramp Generator reduces the
ramp to 1/3 or 1/4 size (selected by A2J585).
ramp to 1/3 or 1/4 size (selected by A2J585).
3
NC
4
/ Remote Sync Enable
Low = Remote Sync Enable. INT / EXT Reference
turned off, and instrument sync provided by the
signal on pin 10.
turned off, and instrument sync provided by the
signal on pin 10.
5
/ Preset 2
Low with Pin 11 High = Recall Preset 2.
Low with Pin 11 Low = Store current F/P settings at
Preset 2 location.
Preset 2 location.
6
/ Preset 3
Low with Pin 11 High = Recall Preset 3.
Low with Pin 11 Low = Store current F/P settings at
Preset 3 location.
Preset 3 location.
7
/ Preset 1
Low with Pin 11 High = Recall Preset 1.
Low with Pin 11 Low = Store current F/P settings at
Preset 1 location.
Preset 1 location.
8
/ Preset 4
Low with Pin 11 High = Recall Preset 4.
Low with Pin 11 Low = Store current F/P settings at
Preset 4 location.
Preset 4 location.