Tektronix 1780-R User Manual
Operating Instructions
1780R-Series Operator’s Manual
3–31
equal that value when the back porch of one display is
aligned with the white bar of the second display.
aligned with the white bar of the second display.
c. The 700 mV (98.0 IRE) calibrator amplitude (NTSC and
PAL) can be used to adjust component levels for
component video.
component video.
d. The 300 mV (PAL) calibrator amplitude is used for
adjusting sync amplitudes.
Menu Information
Figure 3–15: Left Side of Front Panel, showing Menu Buttons and Touch
Screen
Screen
Menu Documentation Overview
This section describes the Password, Preset, Calibrate, Configure,
and Measure menus.
and Measure menus.
Operating Instructions
1780R-Series Operator’s Manual
3–31
equal that value when the back porch of one display is
aligned with the white bar of the second display.
aligned with the white bar of the second display.
c. The 700 mV (98.0 IRE) calibrator amplitude (NTSC and
PAL) can be used to adjust component levels for
component video.
component video.
d. The 300 mV (PAL) calibrator amplitude is used for
adjusting sync amplitudes.
Menu Information
Figure 3–15: Left Side of Front Panel, showing Menu Buttons and Touch
Screen
Screen
Menu Documentation Overview
This section describes the Password, Preset, Calibrate, Configure,
and Measure menus.
and Measure menus.