Samsung VP-D5000 User Manual

✤ 

You can adjust the LCD during playback.

✤ 

The adjustment method is the same as is used while in CAMERA mode. (See page 32) 

The Speaker only works in PLAYER mode.

■

When you use the LCD screen for playback, you can hear the recorded sound from 
the built-in Speaker.

-

Follow the instructions below to decrease or mute speaker volume in PLAYER mode. 

-

Take the following steps to lower the volume or mute the sound while playing a tape 
on the camcorder.

1. Set the device to CAMCORDER and set the Power Switch to PLAYER mode.

2. Press 

(PLAY/STILL) to play the tape.

3. Once the tape is in play and you hear sound, use the MENU DIAL to adjust the volume.

■

A Volume Level display will appear on the LCD. 
Levels may be adjusted from anywhere between 0 to 19. You will not hear 
any sound when the volume is set on 0.

■

If you close the LCD while playing, you will not hear sound from the speaker.

Notes

■

When the cable is connected to the A/V jack, you cannot hear sound from the speaker and 
cannot adjust the volume. 

■

You can hear sound from the speaker by removing the connected cable from the A/V jack 

0 : 2 3 : 4 7

5 5 min

VOL. 

[ 1 1 ]

1 2 : 0 0  

 1 0 . O C T . 2 0 0 3

FADE

S.SHOW

BLC

REV

FWD

TAPE
MEMORY

PLAY

REC

OFF

00655E VP-D5000 UK (034~069)  8/18/03 12:58 PM  Page 34