Hitachi VM-E625LA User Manual

Getting Started

- 15 -

Note: If the OPEN lever is flat, the cover will not close.
Note: Always remove the battery from the camcorder after use.
Note: We cannot guarantee against malfunctions of the camcorder which occur when you use battery packs
other than those specified.
Note: Always attach a battery by the procedure described here. Attaching a battery forcibly could damage it.

Removing the Battery Pack

1. Lift the OPEN lever and pull it up. The power supply attachment cover will open.
2. Push the side of the battery in the direction of the arrow. A click will be heard and the battery is released.

3. Remove the battery and close the cover.

Checking the Battery's Charge

A battery charge indicator is located on the upper right corner of the viewfinder. One of three symbols displays
when the battery is used.

This symbol indicates a fully charged battery.

This symbol indicates a partially charged battery.

This flashing symbol indicates a battery nearly out of power. Use an alternate power source or

charge the battery before continuing to use the camcorder.

Using Alkaline Dry-Cell Batteries

The camcorder can be powered by six alkaline dry-cell batteries inserted into the power supply attachment holder.
The continuous operation time of the camcorder depends on the type of alkaline batteries used. Please ensure
that CAM/OFF/VIDEO switch is in the OFF position whenever attaching or detaching any power supply (i.e.
Battery, AC adapter/charger, etc.)

Note: When alkaline batteries are used to power the camcorder, power is not supplied to the LCD monitor, so