Hasselblad 3034216 User Manual



There is also a one-button short-
cut for changing the browse
ﬁlter.
To use it, press and hold (do not
click!) the Instant Approval but-
ton until the approval status
colour appears. Browsing will
then only display the images
with that classiﬁcation.



Browse shortcut !

Browse

The browse ﬁlter complements the instant-approval system by

enabling you to browse through images according to their approval

status. You have the following choices:
• All:

browses all of the images in the current batch, regardless

of their approval status. This is the default.

• Red:

browses only red-status images from the current batch.

These are images that you have marked for likely deletion. You

might browse these images to make sure you have not eliminated

any usable images and/or to ﬁnd images that you can delete

to make room for new shots.

• Green:

browses only green-status images from the current batch.

These are either new shots that did not trigger an exposure

warning or shots that you manually assigned to green after

overriding an exposure warning.

• Green & Yellow:

browses green and yellow-status images, but

does not show red-status images. These are probably images

that you have either decided to keep or not yet checked for

approval status.

For more information about using the instant-approval system,

please see Using Instant Approval Architecture.

To set the browse ﬁlter using the menus:
1. Select the MAIN MENU > Browse entry. The current setting

is displayed here.

2. Use the

button to step through the ﬁlter options

(described above) until you have selected the ﬁlter you wish
to use.

3. Either move on to another setting by using the navigator but-

ton or press the menu button to exit the menu system and
keep your setting.

The appearance of the ‘Empty Browse Filter’ message signiﬁes that

there are no images with that particular approval status.