Hitachi HV-D25 User Manual
5
Rear panel facilities
Pilot lamp
VIDEO connector
Composite video signal output
(1Vp-p/75 ohms).
REMOTE connector
Connect a remote control box (RC-C10)
or a personal computer.
GL IN connector
Black burst or composite video signal
input when operating with external sync
12V IN connector
Power supply connection
(e. g., AC adaptor)
MULTI connector
Selectable output for RGB or Y, R-Y, B-Y
or Y/C and sync signals
Y/C connector
YC signal output (S connector)
AWB/L button
Direct mode (menu not displayed):
Hold the button depressed for more than
2 seconds for auto white balance.
Menu mode (menu displayed):
Left direction button.
Hold the button depressed for more than
2 seconds for auto white balance.
Menu mode (menu displayed):
Left direction button.
SETUP button
Press to display the camera setup menu.
The direction (U, D, L, R) button
functions differ in the menu and direct
modes.
The direction (U, D, L, R) button
functions differ in the menu and direct
modes.
U button
Direct mode: Not used
Menu mode: Press to shift cursor
upwards.
Menu mode: Press to shift cursor
upwards.
ABB/R button
Direct mode: Hold the button depressed
for more than 2 seconds for auto black.
Menu mode: Right direction button
for more than 2 seconds for auto black.
Menu mode: Right direction button
BAR/D button
Direct mode: Color bar signal on/off
button
Menu mode: Down direction button
button
Menu mode: Down direction button
AUX connector
Control signal output for external
equipment.
HD/VD input for external sync operation
equipment.
HD/VD input for external sync operation
.
For details of each connector, refer to the description of connectors (p. 34).