Hitachi VM-8400LA User Manual
CAMCORDER TO VCR DUBBING
52
CAMCORDER TO VCR DUBBING
If you wish to exchange or copy some of your friend's favorite home recordings, the following
instructions can be used to connect camcorder to VCR for this purpose.
instructions can be used to connect camcorder to VCR for this purpose.
NOTE:
Make sure that the "AV OUT/IN" is in the "OUT" position.
1. Connect the audio/video cable to "AUDIO" and "VIDEO" of your camcorder.
2. Connect the other ends to "AUDIO IN", "VIDEO IN" of your VCR as shown in diagram
above.
3. Play the tape on the camcorder and record it on the VCR.
2. Connect the other ends to "AUDIO IN", "VIDEO IN" of your VCR as shown in diagram
above.
3. Play the tape on the camcorder and record it on the VCR.
NOTE:
If you connect the "VHF OUT TO TV" connector of VCR to the "TV ANT" connector, as
illustrated and set "VCR/TV" selector of the VCR to "VCR" mode, the picture being dubbed by
VCR can be monitored.
VCR can be monitored.
FLYING ERASE HEAD
A rotating erase head which eliminates glitches and rainbow noise that occurs at the joints
between recorded segments.
between recorded segments.