Hitachi VM-7400A User Manual

Page of 39
FADE IN/FADE OUT (Only for VM-7400A) 
- 26 - 
NOTE: When the digital zoom is used, the more the image is magnified, the rougher the picture becomes. Also 
even a slight shaking of the camcorder is conspicuous. 
MACRO 
Allows you to shoot objects as close as 3/8 inch (1 cm) from the lens tip. Press and hold "W" side of power 
zoom switch. An object is auto focused. 
 
 
 
NOTES: 
• 
Determine the size of the object by moving the camera backward and forward.  
• Be careful as the lighting tends to be insufficient when shooting in the above conditions. 
QUICK EDIT (Edit Search) 
The quick edit feature allows you to search for the end of previously recorded material, or find a particular spot 
on your tape, to begin your editing, or recording new material. Quick edit is used while the camcorder is in the 
record/pause (stand-by) mode. By holding down "F.FWD""REW/REVIEW", or "PLAY" you can visually 
search or play your tape. Releasing the buttons ("F.FWD""REW/REVIEW", or "PLAY") immediately stops the 
tape at that position. 
 
 
 
FADE IN/FADE OUT (Only for VM-7400A) 
Use the fade feature to add a professional touch to your recordings. Use the "DIGITAL FADE" to select one of 
the four fade options. 
• White fade: Fades in from a white screen or fades out to a white screen. When "DISPLAY" is pressed and 
the display appears in the viewfinder, "
" appears in the upper left corner of the viewfinder.