Hitachi VZ-HD4000A User Manual



Follow the steps below to connect the camera to an electrical outlet via the 

included AC adapter and power cord.

  Connect the wire from the AC adapter to the DC IN 12V terminal on the 

camera.

  Connect the power cord to the AC adapter.

  Plug the power cord into the outlet.

AC adapter (included)

Power cord (included)

To outlet

To DC IN 12V terminal

Ÿ

When the power is plugged in, the head of the camera will first start to 

move. Plug the power cord in after the device is installed.

Ÿ

Do not use any power cord or AC adapter other than those provided.

Ÿ

This device does not have a power switch. 

When installing the device, either install a dedicated switch that is 

hardwired and easily accessible or plug the power cord into a device 

that is near the outlet and can easily be unplugged/plugged in during 

use. 

If something abnormal should happen, either turn off the dedicated 

switch or unplug the power cord.