Hitachi VZ-HD4000A User Manual

l

• This camera is a precision machine. Take great care that you do not strike 

it against a hard object or let it fall.

• If direct sunlight strikes the lens, the camera could malfunction or a fire 

could occur.

• If sand or dust gets inside the camera or the AC adapter, it may cause 

damage and/or malfunction.

• The surfaces of the camera and AC adapter will be slightly warm, but this 

does not indicate a fault.

• If the temperature of this camera is too high or too low, normal image 

output may not be possible.

• When you move the camera between places where the difference in 

temperatures is great condensation (vapor in air warmed or cooled to water 

droplets) could occur on the lens and/or inside the camera. If condensation 

occurs on the lens, wipe it off with a soft, dry cloth. Even if the external 

surface of camera has dried, condensation may remain inside. Therefore, 

turn the camera off and leave it in a dry place for at least 1–2 hours before 

using it again.

• If the camera is used near strong radio waves or magnetism, such as a 

radio wave tower or electric appliances, noise may be present in the picture 

and the camera may not operate normally.  

At worst the camera could malfunction.