Hitachi DZMV350E User Manual

Page of 169
160
E
ngli
s
h
Miscellaneous
Symptom
Cause and Correction
Reference 
page
Power does not come on, 
or no operation occurs by 
pressing button.
Execute system reset (press the RESET button).
Has the DVD video camera/recorder been subjected to impact?
The DVD video camera/recorder could be damaged. Consult your 
dealer.
The date and time are 
incorrect.
Has the DVD video camera/recorder been left unused for a long 
period of time?
The internal backup battery may be discharged: 
Charge it.
No scene can be deleted. Is the cursor placed on the scene to be deleted?
If the selected scene (framed in red) exists, that scene will be deleted 
even if you use yellow cursor to select any scene. Check the colors 
of cursors and bar graph on the thumbnail screen.
Disc cannot be removed. Did you detach the battery or AC adapter/charger before setting the 
power switch to “POWER OFF”?
Connect the battery or AC adapter/charger, set the power switch to 
VIDEO” and then “POWER OFF”, and remove the disc.
DVD video camera/
recorder cannot be 
operated from remote 
control.
Is the remote control pointed at the infrared receiver on DVD video 
camera/recorder?
Point it at the infrared receiver to operate the DVD video camera/
recorder.
Is the infrared receiver on DVD video camera/recorder exposed to 
direct sunlight or strong fluorescent light, etc.?
The remote control cannot operate the DVD video camera/recorder 
when strong light strikes the infrared receiver. Adjust the place or 
angle of the DVD video camera/recorder.
Is there battery in the remote control?
Also check the polarities of battery. The battery could be dead: Try 
replacing it.
Is the DVD video camera/recorder powered?
Turn it on.
Disc cover cannot be 
closed.
Is disc correctly inserted?
Was disc inserted from wrong direction?
Remove the disc and then reinsert it.
Operating sound is heard 
cyclically.
This sound is heard because the disc is cyclically operated and does 
not indicate a fault.
Some vibrations are felt 
or slight sound is heard 
from mechanism.
These vibrations or sound are caused by disc drive: This does not 
indicate a fault.