Hitachi DZMV350E User Manual

Page of 169
57
E
ngli
s
h
MACRO RECORDING
Use the macro function when recording a small object from close-up position: You can shoot the subject 
as close as approximately 2 cm from the lens surface, magnifying the image to fill the screen.
1
Aim the DVD video camera/recorder at the 
subject, and press the zoom lever to “W” control 
side.
Note
:
Zoom can be used, but the subject may not be focused, 
depending on the distance to the subject. In this case, 
move the zoom to “W” control side to focus.
The amount of light tends to be insufficient during macro 
recording: If the subject image is too dark, use additional 
lighting.
RECORDING SUBJECTS FOR STRONGER WIDE-ANGLE OR TELEPHOTO 
EFFECT
Use tele-conversion lens or wide-conversion lens to record subjects for stronger telephoto or wide-angle 
effect.
Use conversion lenses with the following filter diameters:
DZ-MV350E: 30.5 mm
DZ-MV380E: 37 mm
1
Remove the lens hood from DVD video camera/
recorder.
2
Remove the cap of conversion lens, and screw 
the lens into the filter thread of DVD video 
camera/recorder until it stops.
* With DZ-MV380E, you can use the optional conversion lenses:
Tele-conversion lens (DZ-TL1):
For stronger telephoto effect
Wide-conversion lens (DZ-WL1): For stronger wide-angle effect
Note
:
Be careful not to lose the removed lens hood.
With DZ-TL1 tele-conversion lens, the focusing range at 
“T” (telephoto) control side is between approx. 5 m and 
infinite.
When a conversion lens is attached, note that if you zoom 
in on a subject, vignetting will slightly occur on the “W” 
(wide-angle) control side (the four corners of screen will 
be dim).
(Attach)
Conversion lens
Lens hood
(Remove)