Hitachi DZMV350E User Manual
74
E
ngli
s
h
Removing and Replacing from/in Round DVD
Holder
Holder
You can remove DVD-RAM or DVD-R disc used on this DVD video camera/recorder from Round DVD
Holder and use the uncovered disc on DVD player, DVD-RAM recorder, drive for PC, etc., which conforms
to 8 cm DVD-RAM or 8 cm DVD-R. Removing disc from Round DVD Holder may vary with the disc
maker: See the disc instruction sheet. The following explains the disc in Round DVD Holder made by
Hitachi Maxell.
It is recommended that you do not remove the disc from Round DVD Holder until camera recording is
finished, in order to avoid getting dirt on disc.
Holder and use the uncovered disc on DVD player, DVD-RAM recorder, drive for PC, etc., which conforms
to 8 cm DVD-RAM or 8 cm DVD-R. Removing disc from Round DVD Holder may vary with the disc
maker: See the disc instruction sheet. The following explains the disc in Round DVD Holder made by
Hitachi Maxell.
It is recommended that you do not remove the disc from Round DVD Holder until camera recording is
finished, in order to avoid getting dirt on disc.
Note
:
Using discs removed from holders on various devices may not always be possible.
HOW TO REMOVE DISC
1
Hold the Round DVD
Holder with SIDE A
facing up. While pushing
the two release levers in
the direction of arrows (1)
marked on holder, slowly
open SIDE A of the holder
in the direction of arrows
(2), taking care not to drop
the disc.
Holder with SIDE A
facing up. While pushing
the two release levers in
the direction of arrows (1)
marked on holder, slowly
open SIDE A of the holder
in the direction of arrows
(2), taking care not to drop
the disc.
2
Without touching the
recording/playback
surface, hold the disc edge
and center hole to remove
it.
recording/playback
surface, hold the disc edge
and center hole to remove
it.
1
1
2
2
SIDE A mark
Release
levers
levers
Do not open
more than 90°.
more than 90°.
90°