Hitachi DZ-BD7HA User Manual

In

tro

du

cti

on

• Before recording important shots, always conduct test recording to confirm that images 

are normally recorded.

• Do not touch the recording surface of a disc.
• Check that a disc recording surface is not dirty or 

scratched.

• If the recording surface is dirty, wipe it clean using a 

soft cloth.

• Never touch the pickup.

• While the ACCESS/PC indicator (p.14) is lit, do not 

subject the camcorder to strong vibrations or impacts. 
Caution should be particularly observed while the indicator 
remains lit for a while after the end of recording. 

• We recommend using Hitachi Maxell brand discs. The 

compatibility of the discs with this camcorder is 
confirmed.

• If there is concern that the camcorder may be subjected to large vibrations or impact 

during transport, remove the BD/DVD and protect the camcorder using soft protective 
materials.

• We cannot guarantee that playback is possible on all types of recorders/players.
• Playback may not be possible depending on the model of the playback device or 

recording status of the disc. 

• When a BD-R/DVD-RW/DVD-R recorded with this camcorder is used on another 

device, always finalize the disc (p.113) using the camcorder in advance. 

• Hitachi cannot compensate for any damages caused when recording is not made 

normally or recorded contents cannot be played back because of a defect in the 
camcorder, disc or card. Also, Hitachi cannot be responsible for your recorded video 
and audio.

• If you or a third party make a mistake when handling this camcorder, disc, card, etc., 

the recorded contents may be lost. We cannot be responsible for compensation for 
damage due to loss of recorded contents.

• In the event that your camcorder is sent for repair, whether repair is successful or not, 

recorded content may be lost. Hitachi cannot be held responsible for any lost data.

• Be aware that recording is restricted for some demonstrations, performances and 

exhibitions, even for personal enjoyment.