Hitachi DZ-BD7HA User Manual

C

on

ne

cti

ng

 to

 y

ou

r P

C

„ Using a built-in disc 

drive of your PC to 
read a disc recorded 
on the camcorder

If your PC’s disc drive is compatible 
with the disc you are using, you can 
use the disc as is.
Make sure the disc drive is compatible 
with the disc type you are using.

„ Before terminating PC 

connection (removing 
the PC connection 
cable) and changing 
the power switch 
setting

* If an error occurs during the Safely 

Remove Hardware procedure, first shut 
down Windows, then detach the PC 
connection cable.

Notes

• To use a BD-R/DVD-RW/DVD-

R recorded on the camcorder in 
your PC, finalize the disc using 
the camcorder (p.113). 

• If you wish to write images onto a 

new BD/DVD-RW/DVD-R 
using your PC, do not format the 
disc using the camcorder. 

• Some upright or slot load PC disc 

drives are not compatible with 8 
cm discs. 

• Adapters to convert 8 cm into 12 

cm diameter CDs (for 8cm CDs) 
are not compatible for use with 8 
cm BDs and 8 cm DVDs. Either 
use the camcorder by connecting 
it to your PC, or use a disc drive 
compatible with 8 cm discs.

• ImageMixer 3 HD Edition for 

BDCAM is compatible for use 
with disc drives manufactured 
and sold after 1997, although 
operation is not guaranteed on all 
drive types.

Detach the PC connection cable from 
the PC.

Quit the application and click the 
“Safely Remove Hardware” icon in 
the task tray at the bottom right of 
the Windows display screen.

Select “USB mass-storage device - 
Drive(E:)” and click “STOP”.

The drive name (E:, etc.) will differ 
according to your PC.

Confirm the device again and click 
“OK”.

Detach the PC connection cable.

Click