Hitachi DZ-BD7HA User Manual

Va

rio

us

 R

ec

or

din

g T

ec

hn

iq

ue

s

Attaching the separately 
sold lenses

Use the tele-conversion lens (DZ-
TL43 (separately-sold) to increase the 
telephoto effect, and the wide-
conversion lens DZ-WL43 
(separately-sold) to increase the 
wide-angle effect.
If you choose another model, make 
sure the filter diameter is 43mm and 
the screw pitch 0.75mm.

Remove the lens cap from the 
conversion lens and attach the 
conversion lens to the camcorder

Notes

• If you attach the DZ-TL43 

conversion lens, the focusing 
range at the T (telephoto) side 
will be from approx. 9.84 feet (3 
m) to infinity.

• When the tele-conversion lens or 

wide-conversion lens is used, the 
white balance may not function 
depending on recording 
conditions. (Normally, the white 
balance will be automatically 
adjusted.) In this event, adjust the 
white balance manually (p.71).

• When you zoom while the 

conversion lens is attached, the 
four corners of the screen may 
become a little dark or scratchy at 
the W (Wide) side. (The four 
corners may not be evenly dark.)

• When changing lenses, be careful 

not to drop the camcorder.

• Attaching a conversion lens will 

prevent you from using the flash. 
Turn the “Flash” setting to “Off” 
(p.74).

• Some commercially sold 

conversion lens may not be 
compatible with this camcorder.