Hitachi DZ-BD7HA User Manual

Va

rio

us

 R

ec

or

din

g T

ec

hn

iq

ue

s

Turning the MIC. filter 
On/Off

Setting the recording 
settings to full auto

When recording sound from the built-
in microphone, you can reduce wind 
noise in the recording when the MIC. 
filter is On. Lower frequencies noise 
is eliminated and the target sound 
becomes clearer.

During recording pause, press 
MENU

.

Select “Camera Functions Setup” 

 

“MIC. Filter” 

 “On”/“Off”

Press the confirmation button to 
confirm, then MENU to end.
When the function is turned On, 
“

” appears in the LCD 

monitor (p.42).
• The MIC. filter setting is 

retained in memory even when 
the power is turned off.

• If you set this function to 

“On”, it is recommended to set 
the function to “Off” after 
recording before turning off 
the power unless you always 
intend to use this function.

Note

The MIC. filter does not work if you 
are using an external microphone 
(p.78).

You can reset the following manually 
adjusted recording settings to their 
defaults with the press of a single 
button.

During recording pause or recording, 
press FULL AUTO.
“FULL AUTO” appears in the 
LCD monitor for a while and the 
settings are reset to their default 
settings.