Hitachi DZ-HS503 User Manual
35
1<>2/3
Changing
Display
Language (Language)
You can change the language used to display the menu and information.
The following shows that 日本語(Japanese) is changed to English.
The following shows that 日本語(Japanese) is changed to English.
1
Press the MENU button, then select “初期設
定 (Initial Set up)” using f/e/ d/c/
A. Then select “言語切替 (Language)”.
定 (Initial Set up)” using f/e/ d/c/
A. Then select “言語切替 (Language)”.
2
Press A or c button
with the screen shown
on the right displayed:
The “Language” screen
will appear.
with the screen shown
on the right displayed:
The “Language” screen
will appear.
3
Choose “English”, and
then press A button.
The display will change
to English.
then press A button.
The display will change
to English.
Note
:
The language setting will be stored in memory even
when the DVD video camera/recorder is turned off.
when the DVD video camera/recorder is turned off.
1<>2/3
Setting Date and Time
Set the current date and time so that the date and time you make a recording can be recorded
correctly.
The following procedure can also be used to correct the date and time you have already set.
correctly.
The following procedure can also be used to correct the date and time you have already set.
1
Press the MENU button, use the f/e/
d/c buttons to choose “Date Set” on the
“Date Setup” menu screen.
d/c buttons to choose “Date Set” on the
“Date Setup” menu screen.
2
Press the c button.
The figure for the
month will be selected.
[The digit that is
highlighted first depends on the date display
format (set up in Date Mode): The digit on the
left end of the date display will be first
highlighted.]
month will be selected.
[The digit that is
highlighted first depends on the date display
format (set up in Date Mode): The digit on the
left end of the date display will be first
highlighted.]
Note
:
After setting the figure for the month, press the c
button to select the digit to be set. If you press the
A button after selecting the figure for the month,
button to select the digit to be set. If you press the
A button after selecting the figure for the month,
the screen for verifying the set date will appear
instead of screen for setting day, year or time.
instead of screen for setting day, year or time.
3
Press the d or c
button to select the digit
you want to set in
sequence.
button to select the digit
you want to set in
sequence.
Press the f or e button to select the
number for current date/time, and then
repeat step 3 to set the current date and time.
number for current date/time, and then
repeat step 3 to set the current date and time.
Note
:
To stop date/time setting midway, press the C
button.
button.
HDD
HDD
HDD
HDD
Use f / e / d / c buttons
to select, and then press A to
designate.
to select, and then press A to
designate.
Da t e Mode
ENTER
RETURN
Da t e Se t
1
/ 1 / 2 0 0 7
Da t e Se t u p
1 2 : 0 0AM
Da t e Mode
ENTER
RETURN
Da t e Se t u p
8 : 00AM
Da t e Se t
1 2 /
1
/ 2 0 0 7