Hitachi VM-E521A User Manual
Advanced Techniques
- 35 -
camcorder.
Aiming remote Illustration
Note: Use the wireless remote control within the range of the infrared receiver of the camcorder shown
above.
Note: The wireless remote control may not function in strong light such as direct sunlight or very bright
artificial lighting.
Note: Clear a direct path from the wireless remote control to the infrared receiver. The wireless remote
control won't work if an obstacle blocks the infrared rays.
Note: The remote control code of this camcorder is Hitachi code VCR2. If you have a VCR with the same
code your Hitachi VCR may malfunction when you use the camcorder's wireless remote control.
above.
Note: The wireless remote control may not function in strong light such as direct sunlight or very bright
artificial lighting.
Note: Clear a direct path from the wireless remote control to the infrared receiver. The wireless remote
control won't work if an obstacle blocks the infrared rays.
Note: The remote control code of this camcorder is Hitachi code VCR2. If you have a VCR with the same
code your Hitachi VCR may malfunction when you use the camcorder's wireless remote control.
Creating and Recording A Title
Create titles easily and personalize your recordings while keeping a permanent visual record of what is contained
on a tape. The camcorder can store a title in its memory. A title stored in memory can be displayed and recorded
at any time. A title contains two lines of up to 16 characters per line. The camcorder contains 47 different
characters for creating a title. When creating and recording a title, use the TITLE ON/OFF button on the remote
control. (When creating a title in the CAM mode, the DATE/TITLE button of the camcorder can be used instead of
the TITLE ON/OFF button on the remote control. " TITLE" should be displayed in the viewfinder at this time.)
on a tape. The camcorder can store a title in its memory. A title stored in memory can be displayed and recorded
at any time. A title contains two lines of up to 16 characters per line. The camcorder contains 47 different
characters for creating a title. When creating and recording a title, use the TITLE ON/OFF button on the remote
control. (When creating a title in the CAM mode, the DATE/TITLE button of the camcorder can be used instead of
the TITLE ON/OFF button on the remote control. " TITLE" should be displayed in the viewfinder at this time.)
Note: Be sure to insert the clock battery before creating a title. Although a title can be created without the
clock battery inserted, it will disappear when the battery providing power to the camcorder is removed.
clock battery inserted, it will disappear when the battery providing power to the camcorder is removed.
Creating a Title
1. Connect the camcorder to a power source.
2. Hold down the red button on the CAM/OFF/VIDEO switch and slide it to either CAM or VIDEO.
3. Press the TITLE ON/OFF button on the remote control and a flashing cursor appears in the viewfinder.
2. Hold down the red button on the CAM/OFF/VIDEO switch and slide it to either CAM or VIDEO.
3. Press the TITLE ON/OFF button on the remote control and a flashing cursor appears in the viewfinder.
4. Use the STOP button to place the cursor where you wish to begin your title.
5. Use the F.FWD and REW buttons to select the first character of your title.
5. Use the F.FWD and REW buttons to select the first character of your title.
6. Once you've selected a character press the STOP button to set it.