Hitachi DZMV100A User Manual

Conditions in which PC connection software can be used:
•

Windows 98 preinstalled PC

•

IBM PC/AT compatible PC

•

Equipped with USB port in standard

•

CD-ROM or DVD-ROM drive provided

The following hardware requirements are recommended for smooth use:
•

Pentium II, Pentium III, Celeron with clock frequency 400 MHz or higher

•

Memory of at least 64 MB

•

Free space on hard disc: at least 100 MB

The following are stored in the PC connection software CD-ROM:
•

USB device driver for DVD comcorder

•

UDF Reader

• No power is supplied to this DVD camcorder via PC connection cable: Use the AC adapter/charger to

power the DVD camcorder.

• The PC connection cable provided is exclusively for this DVD camcorder. A generally available USB

cable cannot be used.

• Unplug all cables other than the power cable and USB cable when connecting camcorder to PC.
• Do not unplug the PC connection cable when the ACCESS indicator is lit or blinking: Disconnecting it

could damage the data on disc.

• And, thoroughly read the instruction manual of PC connection software.
• Connect the DVD camcorder to PC at comfortable room temperature: If movies are transferred at

ambient temperature of 95˚F (35˚C) or more for an extended time, reading errors could result.

• Hitachi does not guarantee operation in the following cases:

-  When using USB port added by installing USB extended board
-  When USB hub is used
-  When cables other than the cable supplied are used
-  When PC equipped with DVD-RAM drive is used (in USB connection)

• If you use PC equipped with DVD-RAM drive, change the UDF file system to the UDF device driver

contained in the PC connection software.

Transferring Data to PC