Hitachi DZ-HS903A User Manual

Page of 191
133
C
onn
ect
ing
 to
 Y
our
 P
C
Removing/replacing 
DVD 
Windows
Select the camcorder’s drive icon 
using Windows Explorer or My 
Computer.
→ Click the right button on your 
mouse.
→ Select “Eject”.
→ The camcorder’s disc compartment 
lid will open.
If you insert a different DVD and 
close the lid, the DVD will be 
recognized.
Macintosh
Place the drive icon of this camcorder 
(displayed on desktop) in Trash Box: 
Then the lid of the camcorder’s disc 
compartment will open. Load another 
disc and close the lid, then the disc 
will be recognized.
Removing SD memory 
card
Windows
To make sure the SD memory card is 
not being accessed by the PC, check 
that the CARD ACCESS indicator on 
the camcorder (p.15) is not lit or 
flashing. Then, remove the SD 
memory card from the camcorder.
Note that the CARD ACCESS 
indicator may be lit or flashing for a 
while after a file on the PC is written 
to the SD memory card. Wait until the 
CARD ACCESS indicator goes out. It 
will sometimes take several minutes. 
Macintosh
Drag the drive icon (displayed on 
desktop) and place it in the Trash. 
After making sure that the icon 
disappears from the desktop, remove 
the SD memory card from the card slot 
of the camcorder.
„ Using a PC’s DVD drive 
to read a DVD 
recorded on the 
camcorder
If your PC’s DVD drive and software 
conform to the standards of the DVD 
recorded on the camcorder, you can 
directly insert the DVD into the DVD 
drive to use it.
Note that the DVD drive can handle 
only DVDs whose types conform to 
the DVD drive. You may need to 
change the DVD drive depending on 
the type of DVD recorded on the 
camcorder.
A finalized DVD-RW/DVD-R/+RW 
can be used with a DVD-ROM drive 
(reading only).
Macintosh slot-in type drives 
are not compatible with 8 cm 
discs (as of August 2008). Do not 
use this type of drive, since a 
disc inserted by mistake cannot 
be removed.
DZ-HS903-803-US-Ea_IM_v01d05n02.p.book  Page 133  Friday, September 12, 2008  8:22 PM