Hitachi DZ-HS903A User Manual

Page of 191
162
A
ddi
tion
al I
nfo
rm
at
io
n
Not displayed 
normally in the disc 
navigation screen.
DVD-RAM, DVD-RW(VR mode) recorded on this 
camcorder and edited on another device may not be 
displayed normally in the disc navigation screen. In this 
event, use “Update control info.”.
If too much time is required to display the HDD disc 
navigation screen, try the following.
1 Press 
, then press MENU.
2 Select “Disc setting” or “HDD setting” by pressing c, 
then press the confirmation button.
The “Update Control info.” confirmation screen 
appears.
3 Select “YES” by pressing d, then press the 
confirmation button.
Update of control information will begin. While 
“Updating...” is being displayed, a black screen may 
appear (and time may be required).
(There are some DVD which cannot be used even by 
following the above procedures.)
Photos on a card 
cannot be played 
back.
This camcorder can play back images from an SD 
memory card recorded on other digital cameras 
conforming to the DCF (Design rule for Camera File 
system) standard. The playable pixel range of image data 
on this camcorder is from 80×60 to 4000×3000 
(horizontal/vertical). If the pixel data is outside this 
range, blue thumbnails will appear (thumbnails* in “Fig. 
1”), meaning the image is unplayable.
Even when the number of pixels is within the above 
range, playback may not be possible, depending on the 
recording status of the digital cameras used.
DCF (Design rule for Camera File system) is a unified 
image file format for digital cameras. Image files 
recorded using digital devices conforming to DCF can be 
used in these devices interchangeably.
It takes some time to 
play back photos on 
card.
Stills with a large number of pixels will take more time to 
appear.
Symptom
Cause and Correction
Reference 
page
1/ 6
A l l  scenes
PLAY
PHOTO
SELECT
Fig. 1
*
DZ-HS903-803-US-Ea_IM_v01d05n02.p.book  Page 162  Friday, September 12, 2008  8:22 PM