Hitachi DZ-HS500A User Manual
English
33
1<>2/3
Setting Date and Time
Set the current date and time so that the date and time you make a recording can be recorded
correctly.
The following procedure can also be used to correct the date and time you have already set.
correctly.
The following procedure can also be used to correct the date and time you have already set.
1
Press the MENU button, use the f/e/
d/c buttons to choose “Date Set” on the
“Date Setup” menu screen.
d/c buttons to choose “Date Set” on the
“Date Setup” menu screen.
2
Press the c button.
The figure for the
month will be selected.
[The digit that is
highlighted first depends on the date display
format (set up in Date Mode): The digit on the
left end of the date display will be first
highlighted.]
month will be selected.
[The digit that is
highlighted first depends on the date display
format (set up in Date Mode): The digit on the
left end of the date display will be first
highlighted.]
Note
:
After setting the figure for the month, press the c
button to select the digit to be set. If you press the
A button after selecting the figure for the month,
the screen for verifying the set date will appear
instead of screen for setting day, year or time.
button to select the digit to be set. If you press the
A button after selecting the figure for the month,
the screen for verifying the set date will appear
instead of screen for setting day, year or time.
3
Press the d or c
button to select the digit
you want to set in
sequence.
button to select the digit
you want to set in
sequence.
Press the f or e button to select the
number for current date/time, and then
repeat step 3 to set the current date and time.
number for current date/time, and then
repeat step 3 to set the current date and time.
Note
:
To stop date/time setting midway, press the C
button.
button.
4
After setting the current
date and time, press the
A button.
date and time, press the
A button.
The screen for verifying
the set date will appear.
the set date will appear.
5
If the displayed date and time are correct,
press the d button to choose “YES”, and
then press the A button.
press the d button to choose “YES”, and
then press the A button.
The date and time will be set, and the DVD
video camera/recorder will enter the
recording pause status.
Choosing “NO” will restore the menu screen.
video camera/recorder will enter the
recording pause status.
Choosing “NO” will restore the menu screen.
CHANGING DISPLAY FORMAT OF DATE AND TIME
You can select one of three date display formats: month/day/year, day/month/year or year/
month/day. Choose “Date Mode” on the “Date Setup” menu screen in procedure 1, and then set to
the desired date display mode.
month/day. Choose “Date Mode” on the “Date Setup” menu screen in procedure 1, and then set to
the desired date display mode.
Note
:
This DVD video camera/recorder incorporates a rechargeable battery to store the date and time in memory. If this
built-in battery is exhausted, the date and time will be reset. To prevent this, every 6 months, connect the AC
adapter/charger to DVD video camera/recorder and connect them to AC outlet, or attach a charged battery to the
DVD video camera/recorder, and leave it for at least 24 hours with the DVD video camera/recorder turned off: The
built-in battery will recharge.
built-in battery is exhausted, the date and time will be reset. To prevent this, every 6 months, connect the AC
adapter/charger to DVD video camera/recorder and connect them to AC outlet, or attach a charged battery to the
DVD video camera/recorder, and leave it for at least 24 hours with the DVD video camera/recorder turned off: The
built-in battery will recharge.
HDD
HDD
Use f / e / d / c buttons
to select, and then press A to
designate.
to select, and then press A to
designate.
Da t e Mode
ENTER
RETURN
Da t e Se t
1
/ 1 / 2 0 0 7
Da t e Se t u p
1 2 : 0 0AM
Da t e Mode
ENTER
RETURN
Da t e Se t u p
8 : 00AM
Da t e Se t
1 2 /
1
/ 2 0 0 7
ENTER
1 2 / 1 / 2 0 0 7 8 : 0 0 AM
Da t e s e t u p?
YES
NO
Da t e Se t