Hitachi DZ-HS500A User Manual

English

• If you want to dub only the scenes with dubbed marks 

 , "Category" in HDD setting should be designated 

(see page 110).

• Marks 

 will appear for the thumbnails of the scenes which have been once 

dubbed. If the marks make the thumbnails difficult to see, you can turn off the 

 

marks (see page 84).

• If a finalized disc or a heavily scratched or dirty disc is inserted into this DVD video 

camera/recorder, a message will appear and dubbing will not be possible: Use 
another disc.

• A DVD-RW/DVD-R dubbed on this DVD video camera/recorder will not be finalized: To play it back on a DVD 

recorder, be sure to finalize it on this DVD video camera/recorder.

• The details of editing scenes on HDD (fade, skip, change of thumbnail, etc.) will not be reflected in the scenes 

if they are dubbed on a DVD-RW (VF-mode)/DVD-R/+RW.

• If you combine scenes with different recording dates on a play list, and dub the combined scene to a DVD-

RAM/DVD-RW (VR-mode), the scenes will be dubbed separately for each date. However, if a combined scene 
is subsequently divided, the scenes may not be dubbed separately for each date.

• If you dub scenes combined using the Disc Navigation function to a DVD-RW (VF-mode)/DVD-R/+RW, the two 

scenes immediately before the combination (sometimes more than two scenes) will be dubbed.

• If you divide a scene using the Disc Navigation function, and then dub both the divided scenes to a DVD-RW 

(VF-mode)/DVD-R/+RW, the scene before the division will be dubbed.

This option allows you to dub scenes without dubbed marks, among those recorded on HDD, to a 
DVD beginning with the first scene without dubbed mark.
If those scenes cannot be included on one DVD, the capacity of scenes will be calculated and the 
scenes will be dubbed up to capacity. When the DVD is replaced following the instruction on 
replacement of DVD during dubbing, dubbing will start from the scene following: Repeat this 
operation until dubbing of all scenes on HDD without dubbed marks is finished.

Press the DUBBING button.
The Dubbing Menu will appear.
You can also display the Dubbing Menu from 
the Disc Navigation screen: Press the DISC 
NAVIGATION button, press the MENU 
button, choose “Scene”, “Dubbing”, 
“Execute”, and then press the A button.

From the Dubbing 
Menu screen, choose 
“New” and press the 
A button.
If no DVD is loaded in 
this DVD video camera/recorder, a message 
will appear: Press the DISC EJECT button, 
and then load a DVD.

The screen for verification will appear: 
Choose “YES” and press the A button.

Pressing the f button at this time will allow 
you to check the scenes to be dubbed to a 
DVD that is loaded in the DVD video 
camera/recorder: The scenes to be dubbed 
will be encircled by a red cursor. To return to 
the verification screen, press the C (STOP/
EXIT) button.
To stop dubbing, choose “NO” on the 
verification screen, or press the C (STOP/
EXIT) button.

0 01 / 01 4

A l l   P r o g r a ms

PLAY

SELECT

PHOTO

New

All

Select

Date

EXIT

Dubbing the scene which 

isn't dubbed in HDD.

D u b b i n g   M e n u

ENTER

D u b b i n g   ( N e w )

RETURN

D u b b i n g   ( N e w )

ENTER

CHECK SCENE

D u b b i n g   s c e n e s   t o   DV D ?

YES

NO

Press 

f

Press C