Hitachi DZ-BD70A User Manual
69
Va
rio
us
R
ec
or
din
g T
ec
hn
iq
ue
s
Selecting a recording
mode
mode
1
During recording pause, press
MENU
MENU
.
2
Select “Camera Functions Setup”
“Program AE”
a recording mode
3
Press the confirmation button to
confirm, then MENU to end.
The selected recording mode
(other than Auto) appears in the
LCD monitor (p.42).
• The recording mode is retained
confirm, then MENU to end.
The selected recording mode
(other than Auto) appears in the
LCD monitor (p.42).
• The recording mode is retained
in memory even when the
power is turned off.
power is turned off.
Note
When recording in dark places,
after-images may appear if the
subject is moving or if camera
shake occurs. Use a tripod for best
results.
after-images may appear if the
subject is moving or if camera
shake occurs. Use a tripod for best
results.
Recording Dark
Subjects Using the
LCD Monitor Light
(Assist Light)
Subjects Using the
LCD Monitor Light
(Assist Light)
You can use the LCD monitor as a
light source which allows you to
record a subject up to 3.2 feet (1 m)
away even in a dark place.
To check images, use the viewfinder
(p.20).
light source which allows you to
record a subject up to 3.2 feet (1 m)
away even in a dark place.
To check images, use the viewfinder
(p.20).
1
Repeat steps 1 to 3 on the left
column to select “Low Light” for
recording mode in step 2.
column to select “Low Light” for
recording mode in step 2.
2
Rotate the LCD monitor 180° so that
it faces the same direction as the
lens.
The LCD monitor will light
white.
it faces the same direction as the
lens.
The LCD monitor will light
white.
HDD
BD-R RAM -RW (VR)
R
-RW (VF)
BD-RE
CARD
Note
Moving subjects or camera shake
may cause after-images to appear.
Use a tripod for best results.
may cause after-images to appear.
Use a tripod for best results.