Hitachi DZMV580A User Manual

English

Press down the DISC EJECT button once and 
release it.

A few moments after the ACCESS/PC 
indicator blinks, the cover of disc insertion 
block will open slightly.

Gently open the cover by hand until it stops.

Insert the disc, in Round DVD Holder, into the 
disc guide until it stops.

Note that the recording/playback surface of 
disc must face the inside of DVD video camera/
recorder. The orientation for inserting the disc 
into the disc guide is also predetermined: Load 
the disc correctly, referring to the figure below.

The disc exposed portion must face in the same 
direction as the lens, as shown in figure.

The recording/playback side must face the inside 
(DVD video camera/recorder).

Push the section marked “PUSH CLOSE” on 
the cover of disc insertion block, to close the 
cover.

Turn the DVD video camera/recorder on 
(O VIDEO or N PHOTO).

When “DISC ACCESS” disappears, the DVD 
video camera/recorder is ready for recording.

●

Single sided disc:
The recording/playback side 
is opposite to the printed 
label.
Double-sided disc:
The recording/playback side 
of “SIDE A” is opposite to the 
“SIDE A” marked side.
The recording/playback side 
of “SIDE B” is the “SIDE A” 
marked side.

Disc cover

DISC EJECT 
button

PUSH CLOSE 
portion

Disc 
guide

Correct 
orientation

Incorrect 
orientation

Incorrect orientation

“SIDE A” mark

The opposite side is 
the “SIDE A” 
recording/playback 
side.