Hitachi DZMV230A User Manual

English

You can check your recording immediately on the spot.

Press 

 button in the recording pause status.

The DVD video camera/recorder will enter the
playback mode, and playback will start from the
first image of the scene you have recorded last.
When playback is finished, the DVD video cam-
era/recorder will enter the pause status at the
last image on disc.

Press the   button.

Playback will stop, and recording pause status
will be restored.

Note: When the LCD monitor is opened, playback
sound will be heard from the speaker. Adjust the
sound volume using the volume control buttons
(

, 

).

To temporarily stop playback, pr ess the

 button. Press the 

 button again to re-

start playback.
Note: Even if you stop playback midway and im-
mediately start recording again, the new image
will always be r ecorded after previously r ecorded
images (these images will not be overwritten).
Note: When playback is finished, the 

 mark will

appear at the last image. If the DVD video cam-
era/recorder is left without being operated, it will
return to the recording pause status after approxi-
mately 5 minutes.
Note: If the 

 button is pressed while the 

mark is being displayed, playback will start fr om
the first scene recorded on disc.

uring playback, tilt the joystick up   or down

 to locate the start of desired scene.

Tilt   once

: To return to the first image of

the scene being played back,
and start playback.

Tilt 

 once

: To skip to the first image of the

scene following the one being
played back, and start playback.

Tilt   and hold : To continuously locate the be-

ginnings of scenes, starting
from the scene preceding the
scene being played back. When
the desired image appears, re-
lease the joystick: Playback will
start from that point.

Tilt 

 and hold: To continuously locate the be-

ginnings of scenes, starting
from the scene following the
scene being played back. When
the desired image appears, re-
lease the joystick: Playback will
start from that point.

Note: If you perform skip playback during play-
back pause, the DVD video camera/recorder will
enter the playback pause status at the beginning
of the located scene.
Note: Tilting down 

 in the last scene on disc will

set the DVD video camera/recorder to the play-
back pause status at the last image.
Note: If the temperature inside the DVD video
camera/recorder is high, it may not operate nor-
mally. In such a case, tur n the DVD video cam-
era/recorder off, wait for a while, and then turn it
on again.