Hitachi DZMV230A User Manual

English

This DVD video camera/recorder automatically focuses a subject at the center of screen (auto-focus).
When the DVD video camera/recorder is turned on, auto-focus will always be set.

You can switch the display mode of on-screen information:
• On T (tele) side: approximately 3.6 feet (1 m) from lens surface to infinity
• On W (wide) side: approximately 3/8” (1 cm) from lens surface to infinity

● How to install conversion lens (optional)

The installation screw diameter of this lens is 37 mm.

Remove the lens hood from the DVD video cam-
era/recorder.

Remove the lens cap from the conversion lens
and screw it all the way into the filter screw of
the DVD video camera/recorder.

Note: Be careful not to lose the lens hood.
Note: If the optional tele-conversion lens (DZ-TL1) is attached over the lens, the range where a subject is
focused at T end (telephoto side) will be from approximately 18 feet (5 m) to infinite.
Note: If the optional tele-conversion lens (DZ-TL1) is attached over the lens, the four corners of screen will
be darker (vignetting) on W (wide-angle) side when a subject is zoomed in.

Use the macro function when recording a small object from close-up position: You can shoot the subject
as close as approximately 3/8” (1 cm) from the lens surface, magnifying the image to fill the screen.

im the DVD video camera/recorder at the sub-

ject, and press down the zoom lever to “W” con-
trol side.

Zoom can be used, but the subject may

not be focused, depending on the distance to the
subject.
Note:

The amount of light tends to be insufficient

during macro recording: If the subject image is too
dark, use additional lighting.