Husqvarna TE 300 USA User Manual
12 SERVICE WORK ON THE CHASSIS
57
L01671-10
Main work
– Position the fuel tank and fit the two spoilers to the sides of the radiator bracket.
– Make sure that no cables are trapped or damaged.
– Make sure that no cables are trapped or damaged.
L01637-10
– Mount the fuel tank vent hose.
– Mount and tighten screw
– Mount and tighten screw
1
with the rubber bushing.
Guideline
Remaining screws, chassis
M6
10 Nm (7.4 lbf ft)
B01808-10
(TE EU/AUS)
– Mount and tighten screws
2
with the horn and collar bushings.
Guideline
Remaining screws, chassis
M6
10 Nm (7.4 lbf ft)
(TE USA)
– Mount and tighten screws
2
with the collar bushings.
Guideline
Remaining screws, chassis
M6
10 Nm (7.4 lbf ft)
– Connect the fuel hose
Finishing work
Finishing work
– Mount the seat. ( p. 51)
12.35
Checking the chain for dirt
400678-01
– Check the chain for heavy soiling.
» If the chain is very dirty:
– Clean the chain. ( p. 57)
12.36
Cleaning the chain
Warning
Danger of accidents Oil or grease on the tires reduces their grip.
– Remove oil and grease with a suitable cleaning material.
– Remove oil and grease with a suitable cleaning material.
Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the brake discs.
– Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
– Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
Warning
Environmental hazard Hazardous substances cause environmental damage.
– Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
– Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.