Husqvarna TE 300 USA User Manual
12 SERVICE WORK ON THE CHASSIS
63
Info
Turn the adjusting screw counterclockwise to increase the distance
between the clutch lever and the handlebar.
Turn the adjusting screw clockwise to decrease the distance between the
clutch lever and the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply any force.
Do not make any adjustments while riding!
C00530-11
(TE 250/300)
– Adjust the basic setting of the clutch lever to your hand size by turning adjusting
screw
1
.
Info
Turn the adjusting screw counterclockwise to decrease the distance
between the clutch lever and the handlebar.
Turn the adjusting screw clockwise to increase the distance between the
clutch lever and the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply any force.
Do not make any adjustments while riding!
12.46
Checking/rectifying the fluid level of the hydraulic clutch
Info
The fluid level rises with increased wear of the clutch facing discs.
L01702-10
(TE 125)
– Move the clutch fluid reservoir mounted on the handlebar to a horizontal position.
– Remove screws
– Remove screws
1
.
– Remove cover
2
with membrane
3
.
– Check the fluid level.
Fluid level below container rim
4 mm (0.16 in)
» If the fluid level does not meet specifications:
– Correct the fluid level of the hydraulic clutch.
Hydraulic oil (15) (
– Position the cover with the membrane. Mount and tighten the screws.
B01538-10
(TE 250/300)
– Move the clutch fluid reservoir mounted on the handlebar to a horizontal position.
– Remove screws
– Remove screws
1
.
– Remove cover
2
with membrane
3
.
– Check the fluid level.
Fluid level below container rim
4 mm (0.16 in)
» If the fluid level does not meet specifications:
– Correct the fluid level of the hydraulic clutch.
Brake fluid DOT 4 / DOT 5.1 (
– Position the cover with the membrane. Mount and tighten the screws.