Husqvarna TE 250 EU User Manual
17 TUNING THE ENGINE
93
L01657-10
Main work
– Place a cloth beneath the carburetor to soak up emerging fuel.
– Remove screw plug
– Remove screw plug
1
.
– Completely drain the fuel.
– Mount and tighten the screw plug.
– Mount and tighten the screw plug.
17.6
Plug-in connection, ignition timing map
L01900-10
Plug-in connection
1
is located in front of the fuel tank on the left side of the frame.
Possible states
• Soft – The plug-in connection is disconnected to achieve better rideability.
• Performance – The plug-in connection is connected to achieve a better perfor-
mance.
17.7
Changing the ignition timing map
Switch the ignition timing map from Performance to Soft.
– Disconnect plug-in connection
1
Soft – Better rideability
Switch the ignition timing map from Soft to Performance.
– Connect plug-in connection
1
Performance – Higher performance
17.8
Checking the basic position of the shift lever
0
0
0
A
A
400692-10
– Sit on the vehicle in the riding position and determine distance
A
between the upper
edge of your boot and the shift lever.
Distance between shift lever and upper
edge of boot
10… 20 mm (0.39… 0.79 in)
» If the distance does not meet specifications:
– Adjust the basic position of the shift lever.
17.9
Adjusting the basic position of the shift lever
x
401950-12
– Remove screw
1
and take off shift lever
2
.