Razor MX650 User Manual

3

 

Using a 6mm hexagonal 

key wrench, remove bolts 

from handlebar clamp.

Note: Handlebar clamps are 

located in the plastic bag.

Place handlebars in handle-

bar clamp and adjust angle 

parallel to the fork.

 Insert bolts and tighten 

securely. When properly 

tightened, the handlebars  

should not move forward or 

back.

need Help? Visit our web site for replacement parts, product support and a list of authorized service centers 
at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.

 Align fender with the hole 

in the fork and insert the 

bolt. TIghten securely using 

a 10mm Wrench and 5mm 

Allen Wrench.  

q

 Remove screw from front 

fork. Align the number plate 

with the hole in the fork and 

tighten with a Philipscrew 

driver.

q