Panasonic KX-TCD515E User Manual
Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333
87
Usefu
l Inf
o
o
rmati
o
n
Before Requesting Help
Answering System
Problem
Possible cause
Solution
Page
Handset will not ring.
•
Ringer switched off.
•
Set ringer to one of 6
volume levels.
p.48
Audible Caller sounds late.
•
Recording time is long.
•
Shorten recording time. p.25
No Caller ID number
displayed.
displayed.
•
Service not supplied.
•
Caller has withheld info.
•
Caller ID service must be
arranged with Network
arranged with Network
provider.
p.19
icon flashes
•
Battery low.
•
Recharge batteries.
p.10
Cannot register handset to
base.
•
Max. number of bases
already registered to
handset.
handset.
•
Max. number of handsets
already registered to
base unit.
base unit.
•
Wrong PIN number
entered (Default 0000).
•
Electrical noise in local
area.
area.
•
Delete unused base
registrations from
handset.
handset.
•
Delete unused handset
registrations from base.
•
If PIN number is lost,
contact the Panasonic
contact the Panasonic
Customer Care Helpline.
•
Move base/handset
away from sources of
away from sources of
electrical noise (e.g. TVs,
radios, etc.).
p.64
p.64
p.60
p.5
The unit begins ringing
(one ring) after other
(one ring) after other
connected telephones.
•
The SMS feature is
turned on.
turned on.
•
Turn the SMS feature off,
if you do not use an SMS
if you do not use an SMS
service.
p.42
The display is blank even if
the unit is charged.
•
Battery low.
•
Recharge batteries more
than about 15 minutes.
Problem
Possible cause
Solution
Page
The answering system is
on, but incoming messages
are not recorded.
are not recorded.
•
The recording time is set
to “Greeting Only”.
•
Memory is full (30
minutes or 64 messages).
minutes or 64 messages).
•
Select “1 Minute” or “No
Limit (see “Answering
System”).
System”).
•
Erase some or all of the
messages.
p.73
p.77
You cannot operate the
answering system from a
touch tone phone.
•
Incorrect remote code
entered.
•
Tone are too short to
activate the unit.
activate the unit.
•
The answering system is
off.
•
Enter the correct remote
code.
•
Press each button firmly.
•
Turn on the answering
system.
system.
p.81
p.72, 80
515E_E.book Page 87 Friday, June 27, 2003 2:23 PM