Sprint Nextel DVP 203 User Manual

Chapter 3:

Chapter 3: Getting the Voice Mail System Up and Running

Getting the Voice Mail System Up and Running

12 –

–

– ◆

◆

◆ –

–

– Getting the Voice Mail System Up and Running

Getting the Voice Mail System Up and Running

Getting the Voice Mail System Up and Running Issue

1.6

Issue 1.6

STEP 6

Program Sprint

Digital Voice for the

Correct Phone

System

Protegé

3x8 is the default phone system for Sprint

Digital Voice DVP - 203. Protegé CTX is the default
phone system for Sprint Digital Voice DVP - 403

To change this setup, log onto the system administrator’s mailbox. At
default that is either 10 or 201, depending on the Protegé system and
Sprint Digital Voice. Once logged on follow the prompts to change the
default phone system to the correct Protegé system.

Note:

Note: This step must be performed before the Protegé phone system

is programmed for voice mail.

Change the default phone system to the one installed in
Step 3:

1. Log onto the System Administrator Mailbox, which before

initialization is extension 10 or 201 depending on Sprint Digital
Voice unit installed, as follows:
Dial into the Automated Attendant using the outside number
or

or
Dial the extension number

2. If you hear the Main Greeting, dial #.

Otherwise, go to step 3.

3. If requested, dial mailbox number 10 or 201. Before initialization

of the new system, Sprint Digital Voice’s system administrator
mailboxes are programmed for the lowest mailbox number.

4. At the Main Menu, press DM (36)

DM (36)

DM (36) for the Database Management

Menu.

5. Press SI (74)

SI (74)

SI (74) for System Initialization.

6. Press 3

3 to initialize Sprint Digital Voice database for a specific

phone system.

On the list below, find the code corresponding to the Protegé
system you installed:

1 - Protegé 3x8

2 - Protegé CTX, MTX or LTX

3 - Protegé XTX

Note: If using a phone system other than Protégé, refer to the Release
Notes for Software Versions and the Integration Guide for further
options.

7. Enter the code and #. Follow the voice prompts.