Lucent Technologies 107970212 User Manual
System Management
Group Call Distribution
Use this communications system procedure to specify a new outside line on
which you want Automated Attendant Service.
which you want Automated Attendant Service.
Update Line Coverage on Form A, Page 1 of the System Planner for the
communications system to show modifications to VMS-AA lines before you
begin.
communications system to show modifications to VMS-AA lines before you
begin.
To assign VMS-AA lines to Hunt Group 7:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
].
Enter the System Password, if required.
Press [
#
] [
2
] [
0
] [
6
]*.
At the
Group:
prompt, press [
7
].
At the
Line:
prompt, enter the first VMS-AA line to be programmed as
Press [
Next Data
] until the display reads
1 Assigned.
(Be careful not to
choose
3 VMS Line Cover
because you will assign VMS Line
Coverage rather than Automated Attendant Service to the line.)
To program another line, press [
Next Item
] or [
Prev Item
] until the appropriate
line number displays.
Press [
Next Data
] until the display reads
1 Assigned.
Repeat Steps 7 and 8 for each VMS-AA line.
Press [
Feature
] [
0
] [
0
] to exit programming.
VMS Hunt Delay
Use this communications system procedure to specify either immediate or
delayed call handling.
delayed call handling.
Update Form A, Page 2 of the System Planner for the communications system
to show modifications to the VMS Hunt Delay setting before you begin.
to show modifications to the VMS Hunt Delay setting before you begin.
To change the VMS Hunt Delay setting:
1. Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
].
2. Enter the System Password, if required.
3. Press [
#
] [
5
] [
0
] [
6
].
4. Press [
Next Data
] until the appropriate value displays.
5. Press [
Feature
] [
0
] [
0
] to exit programming.
*
In some countries, the procedure code for Group Call Distribution is #205. Check the
Programming and Use guide for the communications system.
5-34