Lucent Technologies 107970212 User Manual

Initial Programming

Check Form C for extension 10. If a Night Service button is specified, follow the
procedure below.

To program Night Service on a button with lights at extension 10 as specified on
Form C:

1. Press [ 

 ] [ 

 ] [ 

 ] [ 

 ].

2. At this point, do one of the following:

— If you want to assign Night Service to the first available button on the

system phone, press [ 

 ] until the display reads:

Night Service

1 Assigned-Ext10

Go to Step 3.

— If you want to assign Night Service to a specific button*, press [ 

 ].

The display reads:

Night Service

3 Select Button

Press the desired programmable button with lights to assign Night
Service to that button.

3.

4.

Label the Night Service button at extension 10.

Continue with “Music On Hold” below.

If desired, program Music On Hold. See the  Programming and Use  guide for
the communications system for instructions.

*

Select button (option 3) is not available on all systems. Check the  Programming and Use  guide
for the communications system.