Lucent Technologies 107970212 User Manual

Initial Programming

Before you begin, locate Forms A and B2 of the System Planner  for the
communications system.

■

■

■

Refer to Form A, Page 1, Line Coverage. If either check marks or
extension numbers appear in the VMS-Mail column, use “Line Coverage”
on the next page to program personal lines for Call Answer Service.

If nothing is specified in the VMS-Mail column of Form A, refer to Form B2
to see if Automatic VMS Cover is assigned to any extensions. If it is, refer
to “Automatic VMS Cover” and “VMS Cover Rings” later in this chapter.

If neither VMS-Mail for personal lines or Automatic VMS Cover is
specified, skip to “Telephone Button Programming.”

■

■

If check marks appear for any lines in this column, use the procedure in
“VMS Line Coverage” below.

If extension numbers are specified for any lines in this column, use the
procedure in “Line Coverage Extension” below.

To assign VMS-Mail lines checked on Form A, Page 1, Line Coverage, to Hunt
Group 7:

1. Press [ 

 ] [ 

 ] [ 

 ] [ 

 ]*.

2.

3.

4.

5.

6.

7.

8.

At the 

Group: 

prompt, press [ 

 ].

At the 

Line: 

prompt, enter the first line checked in the VMS-Mail

column.

Press [ 

 ] until the display reads 

3 VMS Line Cover.

To program another line, press [ 

 ] or [ 

 ] until the appropriate

line number displays.

Press [ 

 ] until the display reads 

3 VMS Line Cover.

If extension numbers are specified for any lines in this column, use the
following procedure in “Line Coverage Extension.” Otherwise, continue
with the section, “Automatic VMS Cover.”

*

In some countries, the procedure code for Group Call Distribution is #205. Check the
Programming and Use  guide for the communications system.