Sony DSC-H20 User Manual
Ta
ble
of
ble
of
Op
e
e
MENU/Settin
In
49
GB
• When using the digital zoom or [AF Illuminator], the AF range finder frame is disabled and appears in a
dotted line. In this case, the camera works to focus on the subjects at the center of the screen.
• When the focus mode is set to other than [Multi AF], you cannot use the Face Detection function.
• Only [Multi AF] or
• Only [Multi AF] or
(unlimited distance) is available for movies.
• The focus mode is fixed to [Multi AF] while the Smile Shutter function is activated.
• The Semi-manual distance setting contains some errors, and this error increases when the zoom is set to
• The Semi-manual distance setting contains some errors, and this error increases when the zoom is set to
the T side or the lens is tilted upward or downward.
Notes
z
Focusing on subjects near the edge of the screen
If the subject is out of focus, do as follows:
1
Recompose the shot so that the subject is centered
in the AF range finder, and press the shutter
button halfway to focus on the subject (AF lock).
in the AF range finder, and press the shutter
button halfway to focus on the subject (AF lock).
2
When the AE/AF lock indicator stops flashing and
remains on, return to the fully composed shot, and
press the shutter button fully down.
remains on, return to the fully composed shot, and
press the shutter button fully down.
• As long as you do not press the shutter button fully
down, you can retry the procedure as many times as
necessary.
necessary.
AF range finder
frame
frame
AE/AF lock
indicator
indicator