Toshiba BDX1100KC User Manual

1

E

ng

lis

h

•  [Video Adjust]

Select a predefined setting of the video.

1. Press OK .

2. Press/ to adjust the video 

Brightness, Contrast, Hue and Saturation.

{Brightness}-  press  /  to  adjust 

the  brightness  of  display,  goes  left 

means dark and right means bright.

{Contrast}-  press / to adjust the 

contrast  of  display,  goes  left  means 

low  contrast  and  right  means  high 

contrast.

{Hue}- press / to adjust the Hue

of  display,  goes  left  means  low  hue 

and right means high hue.

{Saturation}- press / to adjust

the saturation of display, goes left 

means low Saturation and right means 

high saturation.

3. Press RETURN to exit.

RETURN  Exit

Change

•  [Sharpness]

Select the level of sharpness: High,

Medium, Low

{High} - Select High sharpness level

{Medium}  -  Select  Medium  sharpness 

level

{Low} - Select Low sharpness level

Video Mode

SETUP Exit

Move cursor key to select menu option 
then use “OK” key to select 

•  [Video Mode]

Select  the  output  mode  of  video,options 

include:  Standard,  Vivid,  Smooth,  these 

can change the output display.

{Standard}  output  video  signal  without 

any processing and in standard mode.

{Vivid} output video signal in vibrant color 

mode.

{Smooth} output video signal in smooth 

mode.

1. Press SETUP

[General Setting] menu is displayed.

2. Press  to select [Audio Setting], 

then press  .

3. Select an option, press  to access.

SETUP Exit

Spdif

PCM

PCM

48K

HDMI

Down_samp

Off

DRC

Move cursor key to select menu option 
then use “OK” key to select 

4. Press / to select a setup option and

press   

5. Select the setting you wish to change

and press OK to confirm.

- Press  to return to the previous 

menu.

- Press SETUP to exit the menu. 

[Audio Output]
•  [Spdif]

Select the output mode of COAXIAL 

jack, options include Bitstream, PCM, 

Re-encode and Off.

{Bitstream} – Output digital signal 

without any processing.

{PCM} – Output digital signal with 

processing, only two channels export.

{Re-encode} – Auto select signal type 

from COAXIAL jack according to the 

Audio stream on disc.

{Off} – No output for S/PDIF.

•  [HDMI]

Select the output mode of HDMI Out 

jack, options include Bitstream, PCM, 

Re-encode and Off.

{Bitstream} – Output HDMI digital 

signal without any processing.

{PCM} – Output HDMI digital signal 

with processing, only two channels 

export.

{Re-encode} – Auto select signal type 

from HDMI Out jack according to the 

Audio stream on disc.

{Off} – No output for HDMI.

•  [Down_samp]

Select  the  digital  audio  signal  sampling 

frequency.

{48K} – For discs recorded at sampling 

rate of 48 kHz.

{96K} – For discs recorded at sampling                

rate of 96 kHz.