Toshiba BDX2000KC User Manual

This function plays back approximately at 1.3 times the 
normal playback while keeping the sound output. This 
function is available only on discs recorded in the Dolby 
Digital format.

During playback, press [MODE] repeatedly 
until the Rapid playback setting appears.

Press [ENTER] or [s / B] to switch 

Press [PLAY B] to return to normal playback.

You can adjust the picture quality.

During playback, press [MODE] repeatedly 
until  

Use [K / L] to select your desired item, then 
use [s / B] to adjust the setting.

S Black level

You can adjust the black level setting to make the black 
parts of the pictures as bright as you prefer. You can select 
“On” or “Off”.

S Noise reduction (DVD-video only)

Reduces the noise of the playback picture.

Press [RETURN] to exit.

You can enjoy stereophonic virtual space through your 
existing 2 channel stereo system.

Use [K / L] to select your desired setting.

Press [RETURN] to exit.

“Off” : Plays back in normal speed.

” : Plays back approximately at 1.3 times of normal 

playback.

• Picture adjustment and audio language setting 

cannot be changed during this function.

• Virtual surround does not work during this function.
• This function may not work at some points on a disc.
• During this function, 2ch LPCM will be output from 

HDMI OUT  jack and DIGITAL OUT jack.

“On” : Enhances detail in darker areas.
“Off” : Shows the original picture as recorded.

“Off” : Shows the original picture as recorded.
“1”

: Executes 3D noise reduction which detects and 

deletes the noise by comparing each picture 
frames.

: Executes MPEG noise reduction which reduces 

the block noise and mosquito noise on the 
subtitles on the movie.

: Executes both MPEG noise reduction and 3D 

noise reduction.

• The setting will remain the same even if the unit is 

turned to the standby mode.

• “Black Level” is not effective under the following 

conditions.
- When the picture is output from HDMI OUT jack.
- When the picture is output from COMPONENT 

VIDEO OUT jack with “Component Output” set to 
“480p / 720p / 1080i”.

• You cannot adjust the setting during rapid playback.

“Off” : No surround effect
“1”

: Natural surround effect

: Stronger surround effect

• Set the virtual surround setting to “Off” or lower the 

volume if the sound is distorted.

• Virtual surround does not function during rapid 

playback.

• For the virtual surround, audio signal will always be 

2-channel LPCM.

E5PJ3CD_EN.book  Page 28  Friday, September 18, 2009  2:45 PM