Toshiba BDX2000KC User Manual

Page of 68
57
OTHERS
Servicing
• Please refer to relevant topics on “Troubleshooting” on 
page 51 before returning the product.
• If this unit becomes inoperative, do not try to correct the 
problem by yourself. There are no user-serviceable parts 
inside. Turn off, unplug the power plug, and please call 
our helpline to locate an Authorized Service Center.
Cleaning the cabinet
• Never use a solvent, thinner, benzene or alcohol to clean 
the unit. Do not spray insecticide liquid near the unit. 
Such chemicals may discolor the surface or damage the 
unit.
Cleaning discs
• When a disc becomes dirty, clean it with a cleaning cloth. 
Wipe the disc from the center to out. Do not wipe in a 
circular motion.
• Do not use solvents such as benzine, thinner, 
commercially available cleaners, detergent, abrasive 
cleaning agents or antistatic spray intended for analog 
records.
Cleaning the disc lens
• If this unit still does not perform properly although you 
refer to the relevant sections and to “Troubleshooting” in 
this manual, the laser optical pickup unit may be dirty. 
Consult your dealer or an Authorized Service Center for 
inspection and cleaning of the laser optical pickup unit.
Disc handling
• Handle the discs so that fingerprints and dust do not 
adhere to the surfaces of the discs.
• Always store the disc in its protective case when it is not 
used.
• Note that discs with special shapes (heart-shaped discs, 
octagonal discs, etc.) cannot be played back on this unit. 
Do not attempt to playback such discs, as they may 
damage the unit.
IR signal check
• If the remote control is not working properly, you can use 
a digital camera (including a cellular phone with built-in 
camera) to see if it is sending out an infrared signal.
With a digital camera
(including built-in cell phone cameras):
Point a digital camera towards the 
remote control. Push any button on the 
remote control and look through the 
digital camera. If the infrared light 
appears through the camera, the remote 
control is working.
Maintenance
I
NT
R
O
D
U
CT
ION
C
ON
NE
CTIONS
P
LAYBACK
F
UN
CTI
ON
 
SET
U
P
OT
H
E
R
S
E5PJ3CD_EN.book  Page 57  Friday, September 18, 2009  2:45 PM