Toshiba BDX2200KU User Manual

Connections

This unit is compatible with TOSHIBA’s Wireless LAN Adapter only.

• 

Model name: WLM-10UB1 or WLM-10UN1

You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable operation of 

• 

the wireless network.)

Wireless LAN, in its nature, may cause interference, depending on the use condition (AP performance, distance, 

• 

obstacle, interference by other radio devices, etc.).

Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.

• 

When applying the security key for the AP (wireless IP sharer), only the following is supported.

• 

1) Authentication Mode : WPAPSK, WPA2PSK
2) Encryption Type : WEP, TKIP, AES

Your Blu-ray Disc™ player can also be connected to network with a Wireless access point.

1.  A wireless AP/IP router is required to make a wireless network connection. Connect the wireless LAN adapter to the 

USB port on the rear panel of the Blu-ray Disc™ Player, and set the wireless network options (See Step 2 ~ 3).

2.  After the Wi-Fi device is inserted into the USB slot, press   /   to select “Network” from Settings, and press OK to 

enter.

3.  Press   /   to select “Wireless”, and press OK to enter.

 

(For detailed information, please refer to the user guide for WLM-10UB1 or WLM-10UN1.)

Wireless access point

Modem Cable

Modem Port

Wireless LAN
Adapter

 

Wired

Network Test

Wireless