Toshiba BDX2500KU User Manual

Connections

This unit is compatible with TOSHIBA’s Wireless LAN Adapter only.

•

Model name: WLM-10UB1
You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable operation of 

•

the wireless network.)
Wireless LAN, in its nature, may cause interference, depending on the use condition (AP performance, distance, 

•

obstacle, interference by other radio devices, etc.).
Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.

•

When applying the security key for the AP (wireless IP sharer), only the following is supported.

•

1) Authentication Mode : WEP, WPAPSK, WPA2PSK
2) Encryption Type : WEP, TKIP, AES

Your Blu-ray disc player can also be connected to network with a Wireless access point.

1.  A wireless AP/IP router is required to make a wireless network connection. Connect the wireless LAN adapter to the 

USB port on the rear panel of the Blu-ray Disc Player, and set the wireless network options (See Step 

2 ~ 3).

2.  After the Wi-Fi device inserts to USB terminal, press   /   to select “

Network” from Settings, and press OK to enter.

3.  Press   /   to select “

Wireless”, and press OK to enter.

  (For detailed information, please refer to the user guide for WLM-10UB1.)

Wireless access point

Modem Cable

Modem Port

Wireless LAN
Adapter

 

Wired

Network Test

Wireless