Manualsbrain.com
  1. Manuals
  2. Brands
  3. Toshiba
  4. BDX2000KU
  5. User Manual

Toshiba BDX2000KU User Manual

Download
Page of 67
46
EN
FUNCTION SETUP
Set up the network connection settings in order to use the 
BD-Live function with a BD-Live disc.
After you made IP address/DNS settings or when a LAN
cable is connected, always perform the connection test
to check if the connection is correctly made.
1
In stop mode, press [SETUP].
2
Use [
K / L] to select 
, then press [ENTER].
3
Use [
K / L] to select “Others”, then press 
[ENTER].
4
Use [
K / L] to select “Network Connection”, 
then press [ENTER].
5
Use [
K / L] to select “Connection Test”, then 
press [ENTER].
Connection test will start automatically and the test result 
will appear right after the connection test finishes.
• “Testing...”  : The test is in progress.
• “Pass” 
: Connection test is successfully completed.
• “Fail”
 : Connection test failed. 
Check the connection settings.
 Press [ENTER] to go to the list of network status 
confirmation screen.
6
Press [ENTER] to go back to the previous 
screen, or press [SETUP] to exit.
Network settings are set to the following settings initially.
(In most cases, you can connect to the Internet without 
making any changes to the default settings.)
If you want to set the network settings back to the default
settings as above (except “BD-Live Setting”), follow the
procedure below.
1
Follow steps 1 to 4 in “Connection Test” on this 
page.
2
Use [
K / L] to select “Enable(Easy)”, then press 
[ENTER].
• The unit will start the connection test automatically 
and the test result will appear right after the test 
finishes.
• After the connection test finishes, press [ENTER] to go 
to network status confirmation screen.
3
Press [ENTER] to activate the network settings 
and set the network connection automatically. 
Press [SETUP] to exit.
In following cases, select “Enable(Custom)” to set each 
setting as necessary.
- When connection test failed with the setting of 
“Enable(Easy)”.
- When instructed by your Internet service provider to 
make specific settings in accordance with your 
network environment.
• IP Address Setting / DNS Setting
1
Follow steps 1 to 4 in “Connection Test” on this 
page.
2
Use [
K / L] to select “Enable(Custom)”, then 
press [ENTER].
3
Use [
K / L] to select “IP Address Setting”, then 
press [ENTER] repeatedly to select the desired 
setting.
Network Connection
Connection Test
Note
• If the connection test passes, you can enjoy the 
BD-Live functions using the Internet without making 
any extra settings.
• If the connection test fails, you may need to change 
the MAC address settings of your router. You can 
check the MAC address of this unit on 
“Enable(Custom)” screen.
• “Connection Test” is not available when “Disable” is 
selected in “Network Connection”.
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
then press ‘ENTER’
Others
Connection Test
Enable(Easy)
- IP Address Setting
Auto(DHCP)
- DNS Setting
Auto(DHCP)
- Proxy Setting
Do Not Use
- Connection Speed
Auto
- BD-Live Setting
Allow
Note
• The setting of “BD-Live Setting” will not be set back 
to the default, even if you follow the procedure.
Enable(Custom)
“Auto(DHCP)”
: If your router has DHCP server 
function, select “Auto(DHCP)”.
“Manual”
: If your router does not have DHCP 
server function, select “Manual”.