Toshiba BDX1100KU User Manual
1
E
ng
lis
h
Display Setting
1. Press.SETUP
[General Setting] menu.is.displayed.
2. Press to.select.[Display Setting],.
then.press...
3. Select.an.option,.press to.access.
TV Screen
16:9 Normal
480I/576I
Off
Video Process
Motion Vide...
Motion Vide...
Resolution
Color Space YCbCr422
HDMI Deep Color
... Display Setting...
SETUP Exit
TV
HDMI 1080P 24F On
Move cursor key to select menu option
then use “OK” key to select
then use “OK” key to select
4. Press / to.select.a.setup.option.and
press ..
5. Select.the.setting.you.wish.to.change
and press OK to confirm.
-. Press to. return. to. the. previous.
menu.
-.Press SETUP.to.exit.the.menu..
[TV]
• [TV Screen]
• [TV Screen]
Select. the. screen. format. according. to.
how.you.want.the.picture.to.appear.on.
the.TV.
{16:9 Full}.–.for.a.disc.with.the.aspect.
ratio.of.4:3,.the.output.video.is.stretched.
into.16:9.full.screen.
{16:9 Normal}. –. for. a. disc. with. the.
aspect. ratio. of. 4:3,. the. output. video. is.
resized. vertically. to. match. what. will. be.
seen.on.the.display.
{4:3 Pan&Scan}. –. for. standard. TV,.
Display. a. wide. picture. on. the. entire.
screen. and. cuts. off. the. redundant.
portions.
{4:3 Letterbox}. –. for. standard. TV,.
Display. a. wide. picture. with. two. black.
borders. on. the. top. and. bottom. of. 4:3.
screen.
• [Resolution]
Select. a. video. output. resolution. that. is.
compatible. with. your. TV. display.
capability.
{Auto}. –. Select. the. most. suitable.
resolution.according.to.the.TV..
{480I/576I},.{480P/576P},.{720P},.
{1080I},.{1080P}.
–.Select.a.video.resolution.setting.that.is.
best.supported.by.the.TV
. See.TV.manual.
for.details.
Note:
-When resolution is set to 720p/1080i/1080p:
(1) If only CVBS connected, the resolution of CVBS
video output will be set to 480i/576i automaticlly.
(2) If HDMI and CVBS are both connected, there will
be no CVBS video output, instead, a message will be
shown as follows:
Out Of Range:Check Display Resolution
• [Color Space]
(1) If only CVBS connected, the resolution of CVBS
video output will be set to 480i/576i automaticlly.
(2) If HDMI and CVBS are both connected, there will
be no CVBS video output, instead, a message will be
shown as follows:
Out Of Range:Check Display Resolution
• [Color Space]
Select a predefined Color space of
picture.
{RGB}.–.select.RGB.Color.space.
{YCbCr}.–.select.YCbCr.Color.space.
{YCbCr422}. –. Select. YCbCr422. Color.
space.
{Full RGB}. –. select. Full. RGB. Color.
space.
• [HDMI Deep Color]
This. feature. is. available. only. when. the.
display. device. is. connected. by. a. HDMI.
cable,.and.when.it.supports.deep.Color.
feature.
{30 bits}.–.Output.30.bits.Color.
{36 bits}.–.Output.36.bits.Color.
{Off}.–.Output.standard.24.bit.Color.
Note:
Note:
-When the color space is "YCbCr422", even if HDMI
Deep Color is set to 30bits/36bits, it is not output with
Deep Color.
• [HDMI 1080p 24F]
Deep Color is set to 30bits/36bits, it is not output with
Deep Color.
• [HDMI 1080p 24F]
{On}.–.Enable.1080p.24F.video.resolution.
setting.
{Off}. –. Disable. 1080p. 24F. video.
resolution.setting.
About HDMI 1080p 24F Notes:
If you want the 24Hz output, it should fulfill below 3
conditions:
1.TV supports the 24Hz display:
2.Player choose the 24Hz option in the setup menu;
3.Media must be the 24Hz video.
3.Media must be the 24Hz video.
Notes:
- This resolution becomes effective only when the
playing BD-Disc contents are Film source:
- During HDMI 1080p 24F playback, there will be no
composite output.
playing BD-Disc contents are Film source:
- During HDMI 1080p 24F playback, there will be no
composite output.
[Video Process]
TV
Video Adjust
More...
Low
Low
Video Process
Motion Video...
Motion Video...
Sharpness
... Display Setting...
SETUP Exit
Move cursor key to select menu option
then use “OK” key to select
then use “OK” key to select