Toshiba BDX3300 User Manual

22

English

level.

{Low} - Select Low sharpness level.

1. Press SETUP, [General Setting] menu

is displayed.

2. Press  to select [Audio Setting], 

then press  .

3. Select an option, press  to access.

SETUP Exit

Coaxial

PCM

PCM

48K

HDMI

Down_samp

Auto

Dolby DRC

Move cursor key to select menu option 

 then use “OK ” key to select 

4. Press / to select a setup option and

press .  

5. Select the setting you wish to change

and press OK to confirm.

- Press  to return to the previous 

menu.

- Press SETUP to exit the menu. 

[Audio Output]
•  [Coaxial]

Select the output mode of COAXIAL 

jack, options include Bitstream, PCM, 

Re-encode and Off.

{Bitstream} – Output digital signal 

without any processing.

{PCM} – Output digital signal with 

processing, only two channels export.

{Re-encode} – Auto select signal type 

from COAXIAL jack according to the 

Audio stream on disc.

{Off} – No output for Coaxial.

•  [HDMI]

Select the output mode of HDMI 

OUTPUT jack, options include Bitstream, 

PCM, Re-encode and Off.

{Bitstream} – Output HDMI digital 

signal without any processing.

{PCM} – Output HDMI digital signal 

with processing.

{Re-encode} – Auto select signal type 

from HDMI OUTPUT jack according to 

the Audio stream on disc.

{Off} – No output for HDMI.

•  [Down_samp]

Select  the  digital  audio  signal  sampling 

frequency. (Only Coaxial)

{48K} – For discs recorded at sampling 

rate of 48 kHz.

{96K} – For discs recorded at sampling 

rate of 96 kHz. 

{192K} – For discs recorded at sampling 

rate of 192 kHz.

•  [Dolby DRC] 

Select the Dynamic Range Control mode 

which  makes  it  available  to  listen  to  a 

movie  at  a  low  volume  without  losing 

sound clarity.

{Off} – Non-dynamic range compress. 

{On} – Dynamic range compress.

{Auto}  –  Adjust  the  DRC  according  to 

input audio.

The setting of Auto is effective for Dolby 

TrueHD.

1. Press SETUP, [General Setting] menu

is displayed.

2. Press  to select [System 

Information].

- The current software version and MAC 

address(Ethernet and Wireless) will be 

displayed.

- Press  to return to the previous 

menu.

- Press SETUP to exit the menu.

SETUP Exit

 

Move cursor key to select menu option 

 then use “OK ” key to select 

Software version:  V XX

Ethernet MAC: E8-E0-B7-XX-XX-XX
Wireless MAC: XX-XX-XX-XX-XX-XX

With this player connected to network, you

can play video, music and photo files from 

the server.

1. Connect this player to server network.

2. Press MC.

3. Select [Media Server Search], and press 

OK.

»» All the connected shared servers/  

folders are shown in the list (Max. 16).

4. Select a server, and press OK to open it.

5. Select a kind of media (Photo, Music, 

Video) and press OK to open it.

6. Select a file or a folder to play or open 

it. You can only see and play files 

supported by both Windows Media player 

and the Blu-ray Disc

TM

 player.

• You may control play with the disc play 

features.